This issue got on my table quite a number of times in the last 4 weeks. Customer is trying to use the vHBA feature of Oracle VM for SAPRC 3.3 and newer. While configuring and testing to do so, the customer is seeing a error message like

Oct 10 00:00:00 guest1 scsi: [ID 123455 kern.warning] WARNING: scsi_enumeration_failed: vhba3 probe@w50000xxxxxxxxxxxxx,0 enumeration failed during tran_tgt_init
Oct 10 00:00:00 guest1 vhba: [ID 123456 kern.warning] WARNING: vhba_tran_tgt_init: no softstate for vt(3xxxxxxxxxxxx) lun(0) ua(w50000xxxxxxxxxxxxx,0) tgt-dip(3xxxxxxxxxxxxxx) vin(xxxxxxxxxxx)

When you see something like that, the solution is quite simple. You need a LUN 0 to be visible and functional(it has to react when commands were send) on the target. Or as the documentation states:
When configuring a virtual SAN, note that only SCSI target devices with a LUN 0 have their physical LUNs visible in the guest domain. This constraint is imposed by an Oracle Solaris OS implementation that requires a target's LUN 0 to respond to the SCSI REPORT LUNS command
I would not call it a constraint, it's more like standard compliance as due to the definition of the SCSI-3 standard it’s the only LUN that you could always assume to be there as the SCSI-3 standard simply mandates it ... if the device is standard compliant. The SCSI-3 specification (available at states in section „4.7.2 SCSI target device“:
A logical unit is the object to which SCSI commands are addressed. One of the logical units within the SCSI target device shall be accessed using the logical unit number zero. See 4.8 for a description of the logical unit.
And shall is specified as:
A keyword indicating a mandatory requirement. Designers are required to implement all such mandatory requirements to ensure interoperability with other products that conform to this standard.
So as soon as you make a LUN 0 available on the targets you are seeing with the vHBA, you will see the LUNs.

1 Comment


  • Tim Epp  
    A method has been developed for vSAN to simulate LUN0 response for target ports where no LUN0 is visible or LUN0 is visible but does not respond to REPORT LUNS in Oracle Solaris (or greater). Reference LUNs Not Visible In Guest LDOM When Using vSAN And vHBA (Doc ID 2258845.1).

Add Comment

Enclosing asterisks marks text as bold (*word*), underscore are made via _word_.
Standard emoticons like :-) and ;-) are converted to images.

To prevent automated Bots from commentspamming, please enter the string you see in the image below in the appropriate input box. Your comment will only be submitted if the strings match. Please ensure that your browser supports and accepts cookies, or your comment cannot be verified correctly.